|
bunghoolio
|
 |
« on: June 22, 2006, 05:01:12 AM » |
|
Can't flash 47D with sil3112 sata chipset.
Can't flash 47D with VT6421L sata chipset.
Can flash 47D with Nforce4 chipset.
Please add to list working chipsets and NON working chipsets.
Ta
|
|
|
|
|
Logged
|
|
|
|
Ub312g0d
Newbie
Posts: 1
|
|
« Reply #1 on: June 22, 2006, 09:18:28 AM » |
|
I flashed my 47DH with sil3112 sata chipset.
Onboard SATA on Abit NF7-S
It is currently booting backups so I know it worked perfectly.
The bios does not recognize the drive but slax unlocks it fine and windows detects it and is willing to flash it fine with the drive tray out.
|
|
|
|
|
Logged
|
|
|
|
pash
Hacker
Posts: 75
Dont bite the Hand that feeds.
|
|
« Reply #2 on: June 22, 2006, 01:29:18 PM » |
|
Anybody got it working with Asus P4C800E Deluxe?? (ICH5 Chipset)
When yes, with SLAX?
|
|
|
|
|
Logged
|
Hey Major N., where is IK+ for 360?
|
|
|
|
parasven
|
|
« Reply #3 on: June 22, 2006, 04:07:03 PM » |
|
I flashed my 47DH with sil3112 sata chipset.
It is currently booting backups so I know it worked perfectly.
dito |
|
|
|
|
Logged
|
|
|
|
|
wiggim
|
|
« Reply #4 on: June 22, 2006, 05:02:52 PM » |
|
Hitachi 46D worked fine with a SATA PCI card that was silicon based. I couldn't get it to work with my A7N8X-E Deluxe onboard though. It would detect but where I have a SATA based HDD I Think it was trying to enter raid mode. Might try again when I get a smaller ATA drive setup to flash.
|
|
|
|
|
Logged
|
|
|
|
|
bunghoolio
|
|
« Reply #5 on: June 22, 2006, 07:11:51 PM » |
|
Can't flash 47D with sil3112 sata chipset.
Can't flash 47D with VT6421L sata chipset.
Can flash 47D with Nforce4 chipset.
Please add to list working chipsets and NON working chipsets.
Ta
Sorry. I forgot to mention that Sil3112 was PCMCIA sata card, not PCI or onboard. VT6421L was PCI sata card. When my Hitachi in mode-b XP loads until black screen with mouse pointer. Then hangs! |
|
|
|
« Last Edit: June 22, 2006, 07:13:52 PM by bunghoolio »
|
Logged
|
|
|
|
xfool
Newbie
Posts: 3
|
|
« Reply #6 on: June 22, 2006, 07:21:36 PM » |
|
When my Hitachi in mode-b XP loads until black screen with mouse pointer. Then hangs!
[/quote]
Eject the dvd tray and she'll boot
|
|
|
|
|
Logged
|
|
|
|
|
|
crsnwby
Newbie
Posts: 6
|
|
« Reply #8 on: June 25, 2006, 08:36:02 AM » |
|
Sil3114 on board From asus A8n SLI Deluxe doesnt work, visible in BIOS but can get in mobeb and not in windows
|
|
|
|
|
Logged
|
|
|
|
|
SharkUW
|
|
« Reply #9 on: June 25, 2006, 11:31:16 AM » |
|
SiI3512 on a 47 works, but slax doesn't. I had to do cross-wire. I also had to flash the most recent bios to the card.
|
|
|
|
|
Logged
|
|
|
|
|
SharkUW
|
|
« Reply #10 on: June 25, 2006, 11:33:03 AM » |
|
I wouldn't assume it's coming with the SiI3112 chipset. I thought mine was going to be, but it was a 3512. 3112 is still pictured on the box it came in. |
|
|
|
|
Logged
|
|
|
|
|
lenselijer
|
|
« Reply #11 on: June 25, 2006, 11:49:31 AM » |
|
Well I'll just open the box then before buying it, but what is the difference between the normal and raid controller, will both work for flashing the hitachi drive?
|
|
|
|
|
Logged
|
|
|
|
|
SharkUW
|
|
« Reply #12 on: June 25, 2006, 03:10:29 PM » |
|
I'm not sure entirely, but I've heard of people having to disable RAID on their boards/cards to get it to work. So if you're just getting it to access the 360 ODD then you'll be better off with the cheaper one I spose.
|
|
|
|
|
Logged
|
|
|
|
|
Sephious
|
|
« Reply #13 on: June 25, 2006, 09:17:59 PM » |
|
In response to the question "what is the difference between the normal and raid controller". A raid controller would try to boot to two sata hard drives and run them in tandem rather than as a primary/secondary setup, they would both be seen as one drive(other raid configurations are possible) Therefore if you do not turn off raid in the bios it will try to boot to the 360's disk drive along with your hard drive and most likely hang or you would get a raid error message depending on the bios of your computer.
|
|
|
|
|
Logged
|
|
|
|
|
Sephious
|
|
« Reply #14 on: June 25, 2006, 09:19:56 PM » |
|
Does anybody know if the drive is compatible with the Intel ICH6 chipset?
|
|
|
|
|
Logged
|
|
|
|
|
ryanmp31
|
|
« Reply #15 on: June 25, 2006, 09:57:21 PM » |
|
I flashed my Hitachi with my Intel ICH6R chipset...no probs. Couldn't use the slax CD, so I had to use the wire cross method, but once I got the drive into Mode B, the flashing process completed flawlessly.
|
|
|
|
|
Logged
|
|
|
|
xfool
Newbie
Posts: 3
|
|
« Reply #16 on: June 25, 2006, 11:45:38 PM » |
|
Hitachi 46dh on a intel 8280 chipset from my roommates comp which was a asus A7N8X-x i think.
Worked flawlessly.
Thanks to all invloved
|
|
|
|
|
Logged
|
|
|
|
|
lenselijer
|
|
« Reply #17 on: June 26, 2006, 11:12:18 AM » |
|
Sweex SIL3112 PCI Card, slax CD works, drive gets into modeB.
But when I press reset at login: prompt, the computer wont boot from my IDE harddrive anymore, it says cant find boot device, but the harddisk is detected in bios and works fine. Also when I boot from floppy then and type C:\ it cant find the drive.
As soon as I turn the 360 off, the computer works perfect again, can someone please help me with this?
|
|
|
|
|
Logged
|
|
|
|
|
madwill
|
|
« Reply #18 on: June 26, 2006, 12:01:17 PM » |
|
tryed to falsh hitachi 46d with asus k8v mobo and no luck wont work with slax and i aint trying the cross wire trick,anyone had any luck with the k8v mobo if so i would like to know,if not looks like waiting for tx to release their sata to usb connection kit  |
|
|
|
|
Logged
|
|
|
|
|
lenselijer
|
|
« Reply #19 on: June 26, 2006, 12:39:32 PM » |
|
Update on my hacking adventures Sweex SIL3112 PCI Card (non-RAID), slax CD works, drive gets into modeB. Disconnect Sata cable from pci card and boot into windows, install drivers for non-raid from CDROM. Now connect the sata cable to the pci card again and the drive will be detected. Flashing works fine now  |
|
|
|
|
Logged
|
|
|
|
|
Dilber MC Theme by HarzeM